Rovertech 2.0

ChrisD

Pretty sure the diagnostic line goes through a little black connector located near the main grey connector in the middle of the bulkhead in the engine bay yellow/white iirc

ChrisD

Depends how you want the points to work. For lateness I would do
=1-dayslate/workingdays. Format the cell to %

ChrisD

Had to do it on the coupe not long ago, you'd think there would be an easier way. It was my own fault though being too rough trying to get the rubber pipes off in the engine bay and the pipe broke off the end tank instead.

ChrisD

It really depends but I don't mind paying a bit more for something that is going to fit correctly/last longer. I'm not really into buying stainless just because its stainless when the original part is good enough. However for example that radiator I would still be thinking about it but would probabl...

ChrisD

I think the pics have gone off the website now it was on the day session with mgs on track I think I was on evening session. Still goes alright though would be very suprised if it was broken

ChrisD

The guy who bought it has tracked it, I saw it at snetterton few months back. It was there with a load of other Rovers/MG's.

Chris

ChrisD

OK that seems worth a punt, I'm in. Post up when your about to order and I'll send some money your way.

Thanks
Chris

ChrisD

Ok well, I'm putting myself down for a maybe for standard size studs, will see how interest pans out.

ChrisD

I think I'd be happier with the original diameter tbh, I don't fancy having to mess around that much. What did you do on your 1.4 turbo std diameter or enlarged, what boost did that run and did it have any headbolt issues.

ChrisD

I think you need to be checking the wiring from the CTS to the ECU as above, and that the pins on the ECU plug are making a decent connection.

ChrisD

Would be interested if we could be sure they fit. If I had the choice i'd want them in black.

ChrisD

Just need to wait and see if the middle is in the same place relative to the ends. Look forward to seeing the results of the measurements.

ChrisD

Thanks

ChrisD

Don't suppose you have the part number of the superflex bush to hand off the packet do you, to make sure I'm getting the right one.

ChrisD

I haven't measured but I'd imagine you'd need to grind some of the metal back to allow the shorter bushes to fit correctly.

ChrisD

Posted please

ChrisD

Are you sure the C clip is still where its meant to be, I've had it pop out the groove and slip along the shaft.

ChrisD

As said refusing to go to the disciplinary means it will just eventually be held without you. You won't get sacked for not going to the meeting, depends if what you may have done is a sackable offense under the company policy. Your better off going to the meeting to defend yourself.

ChrisD

Not looked at your sheet tbh but sound like sumifs function is more to your needs

ChrisD

1. Crome - Paid 2. 420gsitlover - PAID 3. james3990 - PAID 4. Reggy5 - PAID (non drilled) 5. carl747 - COC - Sunday 6. Bradharris - Payment end of month 7. Ravinder - Payment end of month 8. Rizzy - may want 2 - Awaiting decision friday 9. Mat_clarke - ? 10. 1994 BRG Coupe - ? (unpainted) 11. Roverd...

ChrisD

£20 for 2 or £40 for all 5, one has a trollied tyre tho

ChrisD

I've got a full set of 5, not sure if I'm close enough though in Cheshunt which is north m25 area. If your interested I'll get you some pictures.

ChrisD

Steering Rack ?

Did it have aircon also ??

ChrisD

aircon??

ChrisD

I'll take a grill.

ChrisD

You can't turn it upside down, it has a ledge about half way down that is the bit that seals, not the bottom edge. As far as I remember anyway.

ChrisD

Hi

I would like a washerbottle for a 200 or maybe something else that could be made to fit not in the usual lower wing mounted position including pumps.

Thanks

ChrisD

I've got the 4-2-1 and sports cat on my vvc coupe and would say I had to chop about a foot off the sports cat pipe (thats has the flexi on it) and get a 3 bolt flange welded on in place of the 2.

ChrisD

Hmm, well I've not actually seen the your not strapped in warning light but I thought it was supposed to be on the clocks, its in RAVE. You can prise the 2 black covers off the buckle if you want to have a look. They unclip (you've not lost anything if it breaks it doesn't work anyway). If you decid...

ChrisD

I think that wire coming out is for the seatbelt warning light which was only on the jap version, other than that its probably the same as a non wired one. Whats wrong with the one in the pic has it been set off?

Chris

ChrisD

i wouldn't buy a car where the other person doesn't have the logbook.

ChrisD

1. Brad - any date 2. ttrw2 (Rob) - 8th Nov onwards 3. Grant620 - 15th Nov or later 4. Rob- aslong as I can atleast give a. weeks notice at work, anytime really 5. C2k - any nov weekend except 28th, much notice as possible though please! 6. Stefaclese - any date should be fine with me, the later the...

ChrisD

1. Brad - any date 2. ttrw2 (Rob) - 8th Nov onwards 3. Grant620 - 15th Nov or later 4. Rob- aslong as I can atleast give a. weeks notice at work, anytime really 5. C2k - any nov weekend except 28th, much notice as possible though please! 6. Stefaclese - any date should be fine with me, the later the...

ChrisD

1. Brad - any date 2. ttrw2 (Rob) - 8th Nov onwards 3. Grant620 - 15th Nov or later 4. Rob- aslong as I can atleast give a. weeks notice at work, anytime really 5. C2k - any nov weekend except 28th, much notice as possible though please! 6. limpabit. Any date. But depends on weather nearer the time ...

ChrisD

any chance u can get me the conecter that goes on the CTS and a length of wire long enough to join it up again.

steve

Rovertech 2.0

Search found 194 matches

Re: MEMS2J live data problem fixing thread

Re: Excel calculation doing my head in

Re: Today I have been....

Re: Is there a market

Re: My Old Rover - Gti Turbo

Re: My Old Rover - Gti Turbo

Re: K4 & KV6 Head / Main studs

Re: K4 & KV6 Head / Main studs

Re: K4 & KV6 Head / Main studs

Re: Is it possible to have a 1400 bottom end and a 1800vvc h

Re: Suspension Group Buy - interest thread

Re: Skunk 2 Billet Ally Lower Control Arms - Group Buy

Re: Skunk 2 Billet Ally Lower Control Arms - Group Buy

Re: Skunk 2 Billet Ally Lower Control Arms - Group Buy

Re: Skunk 2 Billet Ally Lower Control Arms - Group Buy

Re: Skunk 2 Billet Ally Lower Control Arms - Group Buy

Re: could really do with a bit of advice!

Re: my rights with regards to a discipline

Re: Need help with excel formula!

Re: Rear Lower Strut Braces for R8/45/ZS/400

Re: VVC Wheels

Re: VVC Wheels

Re: breaking brm - all parts available and link to the bay

Re: BREAKING vvc coupe flame red

Re: Fibre-Glass & Carbon-Fibre "RoverSport" Grill

Re: K-series bore liner shape

NASP Washer Bottle

Re: Well, its finally done! 1.6 VVC

Re: Seatbelt pretensioners (was Have you got a Jap coupé turbo?)

Re: Seatbelt pretensioners (was Have you got a Jap coupé turbo?)

Re: Lost my logbook

Re: RR - Anyone any plans?

Re: RR - Anyone any plans?

Re: RR - Anyone any plans?

Re: 220 coupe breaking