Rovertech 2.0

Neilbaker86

Bump, still available.

Neilbaker86

A pair of early hubcentric alluminium wheel spacers (Made by Andy 'Mitus'). The basic dimensions for these are: 6mm Thick 4 x 100 PCD 140mm Overall Diameter 48mm Hole through the middle 55.9 outside diameter spigot 56mm inside diameter recess in the rear 4mm tall nose on the face These will fit on t...

Neilbaker86

Cableguy, have you got my PM or email? Not been heard anything back from you regarding the turbo oil drain pipe?

Neilbaker86

Hi the card is VGA/HDMI/DVI and the monitor is only VGA. So do you think getting another monitor with DVI input and lead will improve the image quality so the text clarity will make it usable?... Well put it this way, my LCD monitor has a VGA and DVI input, the difference between the two is chalk a...

Neilbaker86

VGA (being analogue) is awful when using a digital (LCD) monitor. Does your monitor and graphics card have a digital input/output? Like HDMI or DVI, if so use these you will get a much better picture anyway.

Neilbaker86

If you get someone to take off the plastic trim at the bottom of the windscreen under the wiper arms you'll find it has 'Tomcat' written on the back of it.

This applies to all Coupés.

Neilbaker86

Front and back upper timing belt covers for a T-series, and the lower oil pump timing belt cover.

Used, so usual marks and scratches etc but no broken bits.

£20 delivered for all three.

Neilbaker86

Used original Intercooler from a 220 Turbo. Several bent fins as usual but works OK. No leaks.

£30 posted.

Neilbaker86

Front and rear G-Max lowering springs (Part Number: 30 RO 01) to suit all Coupe models (excluding Turbo - officially at least)

Used, but still in useable condition!

£50 posted.

Neilbaker86

As title, in need of an original metal turbo oil drain pipe, must be in Excellent condition (pref new!) or very good second-hand with no leaks etc!

Thanks!

Neilbaker86

An alloy 65mm O/D hose joiner, 100mm long with swaged ends.

Item is brand new. They are £6.25 posted on eBay from the original supplier. So £5 delivered.

Neilbaker86

Still got these, so £6 each posted, or the pair for a tenner posted.

Neilbaker86

Mark bought an alloy throttle body mount from me, paid instantly, top guy!

Neilbaker86

SOLD

Neilbaker86

PM'd

Neilbaker86

Alloy throttle body mount suitable for the T16 engine as per the photographs below:

£25 posted!

Neilbaker86

*BUMP* still got these on the shelf!

Neilbaker86

I saw on the news today that Birmingham Council are to sell off the NEC along with other assets. Once you start selling assets to pay bills you are on the slippery slope. There wont be much left in Britain to sell before long... Keep voting for LibLabCon so we get more of the same folks :thumbup: :(

Neilbaker86

Hello, I'm in need of the interior A pillar trims and the B/C post trims from an early Coupe (ash grey) Basically its items 1 and 3 in the diagram below: http://www.rimmerbros.co.uk/ItemImages/Large/GRID002552.gif Must be in reasonable condition, i.e no massive holes or loads of broken clip fixings....

Neilbaker86

It doesn't matter which car your engine came out of, it depends on which car you're fitting them to. As the distance and position of the radiator, coolant bottle etc are all different.

Neilbaker86

Would they fit a 220 Coupe Turbo?

Neilbaker86

Reduced, £15 posted.

Neilbaker86

Greg pays instantly, pleasure to deal with.

Neilbaker86

SOLD

Neilbaker86

Brand new and unused, 13mm I/D Stainless Braided Hose suitable for Fuel, Oil, Water or Air. It is 3 metres long. Also included will be 2x -10AN Hel Anodised hose ends, silver in colour. This was bought for my 220 Coupe Turbo, but never used. Ideal for catch-tanks etc. http://www.nbsoft.co.uk/IMG_014...

Neilbaker86

Brand new Samco 13mm (12.7) I/D hose in black. 1 metre in length, suitable for air and water. This was bought to use on my 220 Turbo Coupe but never used.

£20 posted

Neilbaker86

gbs100 wrote:or would i make more braking it.

Although it would be a shame, but that would most likely get you the most dosh. It's an early Cowley model anyway so they have few bits and pieces which people like to retrofit to their later vehicles.

Neilbaker86

Water in boot will be either the stupid rear light gaskets, which have a split in them from new, how on earth they ever expected that not to leak I don't know. Or the other stupid design of securing the rear window trim clips to the body by making a hole in the body, then sealing it with a foam wash...

Neilbaker86

I bought a ported head from a member on this forum, so just wondering what to do with my old one. It's complete with a set of turbo cams (not pictured) but no lifters. It was running fine before I took it off, but obviously could probably benefit from some work here and there. Please note that I've ...

Neilbaker86

HA54SYM wrote:£60 posted?

Dave

PM'd

Neilbaker86

Off topic, and an old post, so... sorry :) Do these "require" longer studs ? My car gets a bit of a hammering, and am worried that the standard studs wont cut it. Same goes for the thinner ones you had done if people dont mind commenting :) I did, frankly I wouldn't feel confident driving...

Neilbaker86

Decided to sell my GBE clutch cable, these are no longer available from Grant. I bought this one in the first group buy. It's never actually been used although has somehow managed to pickup some minor damage to the clear plastic insulation over both ends of the cable (photographed) - I really don't ...

Neilbaker86

Any ideas what these go for now? I've read they are no longer available from Grant. I bought this one in the first group buy. It's never actually been used although has somehow managed to pickup some minor damage to the clear plastic insulation over both ends of the cable (photographed) - I really d...

Neilbaker86

I've got two of these for sale, both brand new FAI items in their packaging.

£10 each posted or I'll do the pair posted for £16.50.

Neilbaker86

Would never buy anything on eBay from anyone with less than 99% positive feedback. Reading his recent feedback clearly the Ford Galaxy isn't up to much either...

Rovertech 2.0

Search found 197 matches

Re: 65mm Alloy hose joiner

6mm Wheel spacers

Re: PG1 Gearbox for T series

Re: Fonts in Windows 7 don’t seem to be as sharp as in XP?

Re: Fonts in Windows 7 don’t seem to be as sharp as in XP?

Re: Rover tomcat, wich ones are? Please help to the argentin

T16 Timing belt covers

Original 220 Turbo Intercooler

G-Max Lowering springs

Turbo Oil Drain pipe

65mm Alloy hose joiner

Re: T-Series inlet cam cover gaskets

Re: Coupe100

Re: T16 Alloy throttle body mount

Re: T16 Alloy throttle body mount

T16 Alloy throttle body mount

Re: T-Series inlet cam cover gaskets

Re: Fracking???

Coupe interior parts

Re: samco hoses

Re: Xpower springs (clones) ZR diesel or T16.

Re: 13mm Samco Hose

Re: ghall2004 - feedback thread

Re: 13mm Stainless Braided Hose

13mm Stainless Braided Hose

13mm Samco Hose

Re: 1.8 rover 75 zt look a like

Re: ZT CDTI Buying Advice

T-Series cylinder head

Re: GBE Clutch Cable

Re: 7mm Hubcentric wheel spacers

GBE Clutch Cable

GBE Clutch Cable

T-Series inlet cam cover gaskets

Re: Another day wasted due to an ebay seller