Rovertech 2.0

turbo200 wrote:Have you got a pair of abs sensors?

I'll have a look when I get chance, there were a few boxes of bits & bobs!

Front struts/hubs sold pending payment.

Have you got a N/S front hub with ABS? All the hubs have the mounts for an ABS sensor, the pair with the struts still fitted have the sensors in. I want a turbo top inlet That braided p/steering pipe too (I bought one here last year from ttrw but never received it (or a refund) The fog lights I wou...

Apologies for the delay getting pics up, there was a lot to sort through! These are the parts which I will definitely not need so are the first to go. Once I've cleared some space I can go through the rest a bit better. T-Series turbo exhaust manifolds x2. One has a bolt hole opened up (top of pic) ...

I now have the job lot in my possession! Well, actually it's still in the back of my dad's van :lol: Mitus I am after a K-Series Stainless Exhaust for my Cabby so if there is anything like that in your new stash let us know pal. ;) No k-series goodies I'm afraid. Hi Mitus, if you have any coolant ho...

Hi folks, Read this thread a while back and completely agree with everything Baz has said. I've just posted on http://www.rovertech.net/forum/viewtopic.php?f=37&t=152302 and for those unable to put 2 & 2 together, the "good cause" mentioned there is basically this forum! I am convi...

As mentioned, this is a bargain, so I have sapped it up :D Only really for the engine related stuff so if there's anything someone wants from the list please let me know. Certainly any R8 based items I will be selling on as I have no use for them. Ruthlessly making a few quid isnt the intention here...

Bumpage

Would the MGF bracket be of any use to you? Mounts to the front face of the gearbox and slave pushes towards the engine. Plenty of MGF boxes on ebay so you can see the setup, if you ask them nicely they might even sell you just the bracket...

Just a thought

Would mean rerouting pipework though

Might be too late, but I think they're different. MGF one has a longer shaft and the arm is further from the gearbox casing IIRC.

BlueRover wrote:I have a pair of cam covers currently removed from my Mk1 800 which I intend to strip and paint.
Alternatively I could save myself 3 hours and take these off your hands.
Assuming they'll cost about £5 to post, how about £25 total ?

How's about £30 posted? £10 per hour of tedium saved

That's the way I've seen it done, I was going to try to adapt the covers themselves to fit T-Series carriers. Looks possible but either way is a bit of a faff!

Have an un-modded Nissan Pulsar GTiR Intercooler, been hanging round the kitchen for a while now! Good condition.

Offers

As title, came with an engine I bought but not of any use to me. Flywheel is branded LuK and clutch cover AP - possibly originals? £150 collected from Didcot, Oxon for the pair. http://i38.photobucket.com/albums/e104/andyp1985/Selling/20160118_112256.jpg http://i38.photobucket.com/albums/e104/andyp1...

Recently bought a diesel Rover 45 to rob of climate control goodies and other bits & pieces. Removed the engine as it was a good runner and too good to scrap. Has done 115k, starts up great at any temperature. Turbo feels in good condition, no play. Complete with fuel pump, alternator, PAS &...

As title really, having bought an entire car to put the climate control system into my ZS, I only noticed when stripping it that the transistor pack is missing! Part number is JGN000010, apparently also referred to as the "hedgehog" due to it's appearance. Fits in the heater blower assembl...

As little as possible

It's for a future project that may or may not happen

How much do you want for it?

As title really, not urgent but if anyone has one laying around... AFAIK they were fitted to early 1.4 & 1.6 engines up to around 1994 - Metro GTi & 214/216/414/416's. The inlet manifold was similar to a VVC type (bottom half was probably the same) but the top had "injection" in ra...

No worries, I aim to please

To keep you all up to date, the gaskets were sent out this morning first class so will hopefully reach you tomorrow, or Monday at the latest.

Cheers
Andy

As far as I can tell... Remove inlet manifold, Remove any traces of OE gasket from head & manifold faces, Fit the thermal inlet gasket as it comes out of the packaging - do not remove the paper coating from either side, Refit manifold. Should the joint ever be disturbed again, it's then that you...

Received the order around half 4 this afternoon so haven't been able to post them out :( But they're all packaged up and ready to go so I'll be down the post office tomorrow and sending them off first class. You will probably notice that they're in two halves, split down the centre line of the middl...

Hi all...

Had an e-mail from Ferriday today to say that the order is complete and that it will be posted tomorrow to be with me for Thursday. I will get them out to you all as soon as I can (I'm off work now so should be pretty quick) and will update the thread when I have done so.

Cheers
Andy

Group buy now closed, order has been placed with Ferriday

I don't see the point in the exhaust one as the heat is coming from the head in the first place and the temperature would equalise after time, the head being hotter than the manifold in the first place. As for the inlet, would it really make a huge difference ? The pistons/cylinders are cooled from...

E_T_V wrote:Do you mind if I cross post this to the diesel-heads on .org and facepuke as you may get some takers?

Please do! The more the merrier

E_T_V wrote:Is the L series one a combined inlet and exhaust one like the original gasket?

Have asked the question and yes it is. It is made from the exhaust plate material and costs the same (£28) but you do have to use a standard gasket on both sides of it as opposed to just the manifold side.

pengy_666 wrote:I want both but can't pay till Friday,

Is that too late?

No that's fine, plenty of time to run yet

So far charliecosworth has overpaid by £1 and Allanwarnock has underpaid £1, so it's balanced out

I will post up correct outstanding balances for everyone closer to ordering time

All good here mate, not sure if Paypal still do the "gift" feature now, been a while since I've used it!

1. David-Ti - 1 x Inlet 7mm, 1 x Exhaust / T -Series Full payment received 2. Carmadbaker - 1 x Inlet / T -Series Full payment received 3. turbo 200 - 1 x Inlet 7mm, 1 x Exhaust / T -Series Full payment received 4. Allanwarnock - 1 x Inlet, 1 x Exhaust /T -Series Full payment received 5. charliecosw...

First post edited to clarify some things. Many thanks to David-Ti, you're doing a grand job keeping the list in order :D I forgot to get the ball rolling by putting my own order at the start :facepalm: As we're over the 10 order threshold now could I start taking some deposits please? These will be ...

I have been in touch with Ferriday Engineering as I wanted to purchase both an inlet and exhaust gasket for my 2 Rover powered vehicles. On the website they mention discounts for buying in bulk so I've enquired about this as I thought it could be a good group buy opportunity. So normal price for an ...

Not desperate, just putting the feelers out!

If anyone has a Type A torsen which has a sheared bearing journal I'd be interested in taking it off them for the price of postage. No crownwheel needed just the differential itself. Drop me a PM if you can help.

Cheers

Thread revival/bumpage! I need this stuff gone now, can't believe it was August I tried to sell it

I am now keeping the head, but everything else is available still and I'd like to get in the region of £600. As before, I'd prefer not to split.

Please PM me if interested.

I have one

Not sure what to ask for it but enough to cover postage plus a couple of quid will do, let me know

Just had another batch of these made up (7mm, with countersunk locating holes & stainless bolts)
4 pairs available, £35 posted per pair

PM me if interested!

Bumpage. Had some interest in individual bits if i split, but still no takers for the whole lot. Will give it til the end of the month then look at splitting stuff

Rovertech 2.0

Search found 244 matches

Re: Garage clear out 220 turbo bits - job lot

Re: Garage clear out 220 turbo bits - job lot

Re: Garage clear out 220 turbo bits - job lot

Re: Garage clear out 220 turbo bits - job lot

Re: Pride of Longbridge 2018 Rovertech stand and meet!

Re: Garage clear out 220 turbo bits - job lot

Re: L-Series engine 115k

Re: 620/820 clutch release lever

Re: 620/820 clutch release lever

Re: M-Series cam covers & Pulsar I/C

Re: M-Series cam covers & Pulsar I/C

Pulsar I/C

75/ZT 1.8 Turbo gearbox & clutch

L-Series engine 115k

45/ZS Facelift heater blower transistor pack

Re: Early K-Series Aluminium fuel rail

Early K-Series Aluminium fuel rail

Re: Ferriday Thermal Inlet & Exhaust Gaskets

Re: Ferriday Thermal Inlet & Exhaust Gaskets

Re: Ferriday Thermal Inlet & Exhaust Gaskets

Re: Ferriday Thermal Inlet & Exhaust Gaskets

Re: Ferriday Thermal Inlet & Exhaust Gaskets

Re: Ferriday Thermal Inlet & Exhaust Gaskets

Re: Ferriday Thermal Inlet & Exhaust Gaskets

Re: Ferriday Thermal Inlet & Exhaust Gaskets

Re: Ferriday Thermal Inlet & Exhaust Gaskets

Re: Ferriday Thermal Inlet & Exhaust Gaskets

Re: Ferriday Thermal Inlet & Exhaust Gaskets

Re: Ferriday Thermal Inlet & Exhaust Gaskets

Ferriday Thermal Inlet & Exhaust Gaskets

Knackered Type A

Re: Forged leftovers

Re: T16 Non A/C Water Pump Housing

Re: 7mm Hubcentric wheel spacers

Re: Forged leftovers