Rovertech 2.0

Mr_James

Problem isn't it breaking it's that it gets blown open from high pressure and finding one that can handle high pressure isn't easy or cheap.

Mr_James

Not quite sure why I just looked for it and didn't except it to to be expensive should have realised by the fact it had Sard in the name

Mr_James

Cableguy wrote:
Mr_James wrote:Actually most cars benefit more from a recirc valve but try using one when you're running 24psi just doesn't work
Nothing wrong with running a recirc at 24 psi.

There is when even a forge one doesn't hold hard enough and you end up with a nice boost leak!

Mr_James

Actually most cars benefit more from a recirc valve but try using one when you're running 24psi just doesn't work

Mr_James

My saab 900 has a dump valve thing is some petrol cars do actually need one because of the boost they're running mines running enough boost that it just blows recirc valves lol

But most cars don't actually need one especially ones running about 12psi

Mr_James

No by 5" straight through I meant no cat or decat it was custom made to fit an MR2 bolts straight onto the downpipe box itself is made by Japcan someone I know had it made then crashed his 2 before it went on so he let my have it for £115 full stainless.... BARGAIN! :lol: Figure i'll make the m...

Mr_James

No I put in on the 178bhp version you'd know that if you read the whole thread though

Mr_James

Last week I had to do the clutch slave cylinder on the saab went to bed at 3:30am then back up at 5:30am for work not sure how I do it at times lol

Mr_James

8Pm Finish work
8:30Pm Start changing the MR2's gearbox
7Am Complete gearbox change
9Am Back to work

Mr_James

It must be I thought i'd get pulled after the big 5" straight through exhaust was put on the MR2 lol

Mr_James

The MR2 not sure what group it is all I know is insurance wasn't cheap due to the fact it's a jap import and the mods including the fact it has the Rev3 jap engine which is 178bhp so pretty nippy for a NA

Mr_James

Na i'm 22 the saab is group 17 which really sucks lol

Mr_James

Oh and in case anyone is wondering here are my current stats....

Points: None
Crashes: None
Been pulled over: None

Mr_James

You're all a big bunch of girls! Try working outside on the car in close to zero temperatures

Mr_James

Well been quite a long time since I've been here so thought I'd pop by and see how things are going my dad now has my rover it's still going strong failed it's last MOT due to lambda being too high garage said it was the o2 sensor luckily my parents listened to me and it was the thermostat causing i...

Mr_James

Personally I can't fault normal helicoils they're holding the engine mounts to the gearbox on the MR2 and the bolts are properly torqued up to 55lb/ft

Mr_James

Easier solution is if she has a problem with it... DIVORCE lol

Mr_James

Leo wrote:Looks like Alex and I weren't the only ones to have missed the point in the original post!

No I just figure as I don't have a wife she'd never find out!

Mr_James

Mr_James

In all fairness if you know your brakes are starting to fade quite badly why go and push so hard into a corner? The way I see it is he was highly irresponsible in his actions and no one should have thanked him for attempting to avoid an accident that his stupidity caused!

Mr_James

Either an RX7 Twin Turbo or a Supra had thought about a 200sx but after I put a turbo engine in the MR2 a standard one would be a step backward

Mr_James

Get her to go in there with a couple of large guys and demand the keys back if not turn the place upside down to find them I know thats what I'd be doing

Mr_James

Doesn't sound too bad could be worse and will teach you to remove a drive shaft properly rather than pulling it

Mr_James

I've never had anyone complain about me working on the car on the drive, in fact when I was under the MR2 for a good hour the other day changing the clutch again(Funny story there) one of the polish that lives opposite came over to check I was ok thought that was rather nice of him

Mr_James

Check out http://www.onlinepallet.co.uk/

Mr_James

There could have been a number of reasons they did that though.... Was the address it was being delivered to the same as the one the card was registered to?

Mr_James

Make sure and check what ever one you go for doesn't have a welded diff before you part with your cash..... Test drove one that I didn't know was welded and it's more scary than driving the MR2 in the wet lol

Mr_James

Remove the 214 badge and replace with a 200 badge then get R200 KDA

Mr_James

Think it's just that server being slow....

Mr_James

The person who wrote it also seems to be a retard.... CLEAR INDICATORS - Boy racers are renowned for their complete failure to appreciate the finer points (and often even the essential points) of design, and clear indicators are one such example. No doubt inspired by one person modding his white car...

Mr_James

Learn french what a great idea then maybe he'll make it to another country before having to give up because he can't speak that language

Mr_James

munky wrote:drums work better for initiating drifts....

That is all.

Or just do a little modifying and put in a hydraulic controlled handbrake

Mr_James

Theres much worse out there than that, You not seen the video involving one cup?

Mr_James

This is the reason I stopped doing computers quite a while ago.... I swear it's more stressful than dealing with old people at work that can't see the 6ft tall stack of banana's next to them

Mr_James

Cream Soda

Rovertech 2.0

Search found 276 matches

Re: Spot the plonker...

Re: Spot the plonker...

Re: Spot the plonker...

Re: Spot the plonker...

Re: Spot the plonker...

Re: Hello :)

Re: Hello :)

Re: warming up the garage

Re: warming up the garage

Re: Hello :)

Re: Hello :)

Re: Hello :)

Re: Hello :)

Re: warming up the garage

Hello :)