Breaking my mates Bubble Turbo, Loads of good bits. UPDATED
Moderators: Forum Moderators, User Administrators
Forum rules
Can't post in this section? Please read our rules
Can't post in this section? Please read our rules
Breaking my mates Bubble Turbo, Loads of good bits. UPDATED
As above, its not mine and all question directed to Matt on 07513065998.
Black Lexus Style Rear Lights, as new - £50 posted
http://www.lexuslights.net/ROVER_&_MG-R ... _info.html
Emerald M3DK currently loaded with Tomcat Racer map. Comes with data cable, software. The serial number high enough to allow it to be upgraded to K3 for £50 by Emerald (can be done while at a mapping session while with them). £370 delivered
3 Bar Map Sensor - £20 delivered
Evo 7 intercooler on modified rad frame. with some silicon pipes and slim line 9" SPAL fans on frame. Allows you to keep the original bonnet catch (with some slight modding to catch frame) £70
Baileys Dump Valve and T-Piece. Bought as a DV26, but will double check this to make sure - £20 delivered.
Full ZR kit in Tahiti Blue. Front bumper, rear bumper with stainless trim, side skirts and fin spoiler with clear brake light - £80
polybushed ARB droplinks - £25
Front steady bar polybushes - £15
Brand new Fast Road Clutch - £80
Alloy bottom rad pipe - £15 posted
Manual Boost Controller - £10 posted
Drive Shafts Both sides - £40
Converted Loom for wasted Spark engine - £50
ZR subframe with modified power steering pipes to join to t series engine pipes. - £100
Phase 2 complete dash, with late heater box. ***
As stated at the top, contact Matt on 07513065998 for any details..
Black Lexus Style Rear Lights, as new - £50 posted
http://www.lexuslights.net/ROVER_&_MG-R ... _info.html
Emerald M3DK currently loaded with Tomcat Racer map. Comes with data cable, software. The serial number high enough to allow it to be upgraded to K3 for £50 by Emerald (can be done while at a mapping session while with them). £370 delivered
3 Bar Map Sensor - £20 delivered
Evo 7 intercooler on modified rad frame. with some silicon pipes and slim line 9" SPAL fans on frame. Allows you to keep the original bonnet catch (with some slight modding to catch frame) £70
Baileys Dump Valve and T-Piece. Bought as a DV26, but will double check this to make sure - £20 delivered.
Full ZR kit in Tahiti Blue. Front bumper, rear bumper with stainless trim, side skirts and fin spoiler with clear brake light - £80
polybushed ARB droplinks - £25
Front steady bar polybushes - £15
Brand new Fast Road Clutch - £80
Alloy bottom rad pipe - £15 posted
Manual Boost Controller - £10 posted
Drive Shafts Both sides - £40
Converted Loom for wasted Spark engine - £50
ZR subframe with modified power steering pipes to join to t series engine pipes. - £100
Phase 2 complete dash, with late heater box. ***
As stated at the top, contact Matt on 07513065998 for any details..
Last edited by alileg69 on Thu Nov 03, 2011 11:27 am, edited 8 times in total.
2004 Vw Transporter T30
2003 Audi A3 TDI Quattro
2004 ZR 160 Soon to be rallycar
2003 Audi A3 TDI Quattro
2004 ZR 160 Soon to be rallycar
-
ghall2004
- Bronze Trader

- Posts: 7502
- Joined: Sat Feb 02, 2008 4:56 pm
- feedback: 1203894
- Location: Oxgangs, Edinburgh
Re: Breaking my mates Bubble Turbo, Loads of good bits.
Declaring interest in the Forge actuator. Sent Mat a Message regarding the item
-
Allanwarnock
- Rovertech Kiloposter
- Posts: 1770
- Joined: Thu Apr 02, 2009 12:09 am
- feedback: 1041558
- Location: Lanarkshire
Re: Breaking my mates Bubble Turbo, Loads of good bits.
Dibs on the exhaust. Possibly more. I have txt Matt.
Cheers
Cheers
"Alrite mate, whats in that?"
"im in it"

"im in it"

Re: Breaking my mates Bubble Turbo, Loads of good bits.
Any offside driveshafts going cheap?
-
Crome
- RT GOD
- Posts: 3504
- Joined: Sat Nov 04, 2006 5:13 pm
- feedback: 834151
- Location: Largs, West Coast Scotland
Re: Breaking my mates Bubble Turbo, Loads of good bits.
any prof of the bottom end build? very interested if it can be proven those rods and pistons were used.
crome
*edit* dids on bottom end
crome
*edit* dids on bottom end
Rover Coupe Turbo

CLICK to View Coupe Project
Landrover Discovery 300tdi (modifed)
Coupe Turbo (the toy)
1983 mk3 Ford Capri (restoration)
VVC coupe (track slag)

CLICK to View Coupe Project
Landrover Discovery 300tdi (modifed)
Coupe Turbo (the toy)
1983 mk3 Ford Capri (restoration)
VVC coupe (track slag)
-
Crome
- RT GOD
- Posts: 3504
- Joined: Sat Nov 04, 2006 5:13 pm
- feedback: 834151
- Location: Largs, West Coast Scotland
Re: Breaking my mates Bubble Turbo, Loads of good bits.
have you got photos of pistons and rods? before and during the build?
crome
crome
Rover Coupe Turbo

CLICK to View Coupe Project
Landrover Discovery 300tdi (modifed)
Coupe Turbo (the toy)
1983 mk3 Ford Capri (restoration)
VVC coupe (track slag)

CLICK to View Coupe Project
Landrover Discovery 300tdi (modifed)
Coupe Turbo (the toy)
1983 mk3 Ford Capri (restoration)
VVC coupe (track slag)
-
harland292
- Rovertech Kiloposter
- Posts: 1976
- Joined: Thu Jan 14, 2010 12:40 am
- feedback: 1167050
- Location: Outwel
Re: Breaking my mates Bubble Turbo, Loads of good bits.
Iv purchased the engine and driveshafts....
collecting once there out the car
collecting once there out the car
-
l88ajy
- Rovertech Kiloposter
- Posts: 1046
- Joined: Sun Aug 22, 2010 11:59 am
- feedback: 1227133
- Location: Sunderland
Re: Breaking my mates Bubble Turbo, Loads of good bits.
text sent regarding dump valve...
Re: Breaking my mates Bubble Turbo, Loads of good bits.
how dare youharland292 wrote:Iv purchased the engine and driveshafts....
collecting once there out the car
-
harland292
- Rovertech Kiloposter
- Posts: 1976
- Joined: Thu Jan 14, 2010 12:40 am
- feedback: 1167050
- Location: Outwel
Re: Breaking my mates Bubble Turbo, Loads of good bits.
sorry beat u to it lol 
-
_BILLY_ZR_
- Rovertech Kiloposter
- Posts: 1594
- Joined: Tue Nov 03, 2009 8:55 pm
- feedback: 1092452
- Location: Milton keynes
Re: Breaking my mates Bubble Turbo, Loads of good bits.
does he have the diesel gearbox mount/upgrade ?
-
rwd2007
- Forum Regular
- Posts: 155
- Joined: Tue Jun 10, 2008 4:47 pm
- feedback: 1042993
- Location: cambridge
Re: Breaking my mates Bubble Turbo, Loads of good bits.
hello mate if you ve still got the gear box ill have it. where abouts are ya?
-
t'mill
- Rovertech Kiloposter
- Posts: 1161
- Joined: Sat Nov 13, 2010 11:26 pm
- feedback: 1151874
- Location: South Wales & Darwen, Lancs
Re: Breaking my mates Bubble Turbo, Loads of good bits.
What makes your fast road clutch? And how does it feel compared to a standard one?
-
quick_spider
- Forum Senior
- Posts: 245
- Joined: Tue Aug 09, 2005 2:26 pm
- feedback: 1150874
Re: Breaking my mates Bubble Turbo, Loads of good bits.
Engine is back up for sale.harland292 wrote:Iv purchased the engine and driveshafts....
collecting once there out the car
Car/Parts are in Derby
-
harland292
- Rovertech Kiloposter
- Posts: 1976
- Joined: Thu Jan 14, 2010 12:40 am
- feedback: 1167050
- Location: Outwel
-
harland292
- Rovertech Kiloposter
- Posts: 1976
- Joined: Thu Jan 14, 2010 12:40 am
- feedback: 1167050
- Location: Outwel
Re: Breaking my mates Bubble Turbo, Loads of good bits.
yup he has em mate.... 40 pounds for both, i got new ones*ASHY* wrote:Driveshaft?
Re: Breaking my mates Bubble Turbo, Loads of good bits.
How comes?harland292 wrote:i got new ones*ASHY* wrote:Driveshaft?
-
harland292
- Rovertech Kiloposter
- Posts: 1976
- Joined: Thu Jan 14, 2010 12:40 am
- feedback: 1167050
- Location: Outwel
Re: Breaking my mates Bubble Turbo, Loads of good bits.
mine started clickin and matt could not guarantee me they were perfect just they were ok when fitted.. so got some of reconditioned ones as they were,nt that expensive
-
m220syg
- Rovertech Veteran
- Posts: 551
- Joined: Tue Feb 05, 2008 5:10 am
- feedback: 1053021
- Location: cumbria...
- Contact:
Re: Breaking my mates Bubble Turbo, Loads of good bits.
has it got the loom to wire a turbo motor up, in a 25?
-
quick_spider
- Forum Senior
- Posts: 245
- Joined: Tue Aug 09, 2005 2:26 pm
- feedback: 1150874
Re: Breaking my mates Bubble Turbo, Loads of good bits.
He has a plug and play loom for a wasted spark engine into a ZR/25, along with ECU, 5AS and fobs - give him a bell.m220syg wrote:has it got the loom to wire a turbo motor up, in a 25?
Jon
Re: Breaking my mates Bubble Turbo, Loads of good bits.
i'll have the engine 
pm'd
pm'd

Of all the things i've lost in my life, i miss my mind the most. Ozzy
Re: Breaking my mates Bubble Turbo, Loads of good bits.
chances off a cheeky price budge on exhaust?

Frozen White 2.0 T16 Turbo bubble
Build Thread:
http://www.rovertech.net/forum/viewtopi ... 0&t=127402
Build Thread:
http://www.rovertech.net/forum/viewtopi ... 0&t=127402
Re: Breaking my mates Bubble Turbo, Loads of good bits.
o and is it stainless by any chance?
Frozen White 2.0 T16 Turbo bubble
Build Thread:
http://www.rovertech.net/forum/viewtopi ... 0&t=127402
Build Thread:
http://www.rovertech.net/forum/viewtopi ... 0&t=127402
-
_BILLY_ZR_
- Rovertech Kiloposter
- Posts: 1594
- Joined: Tue Nov 03, 2009 8:55 pm
- feedback: 1092452
- Location: Milton keynes
Re: Breaking my mates Bubble Turbo, Loads of good bits.
rear engine mount if its not split ?
-
_BILLY_ZR_
- Rovertech Kiloposter
- Posts: 1594
- Joined: Tue Nov 03, 2009 8:55 pm
- feedback: 1092452
- Location: Milton keynes
Re: Breaking my mates Bubble Turbo, Loads of good bits.
quick_spider wrote:Engine is back up for sale.harland292 wrote:Iv purchased the engine and driveshafts....
collecting once there out the car
Car/Parts are in Derby
time waster lol
-
bjrespect
- RT GOD
- Posts: 6318
- Joined: Tue Mar 07, 2006 7:57 pm
- feedback: 800056
- Location: preston lancs
Re: Breaking my mates Bubble Turbo, Loads of good bits.
harland mess you about what a suprise
Re: Breaking my mates Bubble Turbo, Loads of good bits. UPDA
BUMP
2004 Vw Transporter T30
2003 Audi A3 TDI Quattro
2004 ZR 160 Soon to be rallycar
2003 Audi A3 TDI Quattro
2004 ZR 160 Soon to be rallycar
-
tomcat
- RT BiKiloPoster
- Posts: 2576
- Joined: Fri Feb 21, 2003 8:23 am
- feedback: 815833
- Location: colchester
Re: Breaking my mates Bubble Turbo, Loads of good bits. UPDA
ecu is £150 for upgrade 
ex: race dunlop rover turbo cup car
http://www.rovertech.net/forum/viewtopic.php?t=6228
feedback http://www.rovertech.net/forum/viewtopi ... T+FEEDBACK
http://www.rovertech.net/forum/viewtopic.php?t=6228
feedback http://www.rovertech.net/forum/viewtopi ... T+FEEDBACK
Re: Breaking my mates Bubble Turbo, Loads of good bits. UPDA
pm'd regarding the DV and t-piece 
Re: Breaking my mates Bubble Turbo, Loads of good bits. UPDA
Must have gone up since matt contacted them!tomcat wrote:ecu is £150 for upgrade
2004 Vw Transporter T30
2003 Audi A3 TDI Quattro
2004 ZR 160 Soon to be rallycar
2003 Audi A3 TDI Quattro
2004 ZR 160 Soon to be rallycar


