Page 1 of 1
Siemens 660cc for use with DTA and so on
Posted: Sun Nov 01, 2009 2:35 pm
by ryan_220
Siemens DEKA IV Mototron 60lb/hour High Impedance Injectors ( Long Style ) with EV1 Connector
Not had much use 3-4k had them since july 2008 run them on a GT28rs and then GT3071r for a short time and where faultless. One of the best types of injectors on the market.
Can get pics of them if you want to see them only selling due to going a different direction.
£150 posted unless out side of UK
Re: Siemens 660cc for use with DTA and so on
Posted: Tue Nov 03, 2009 8:15 pm
by ryan_220
BUMP
Re: Siemens 660cc for use with DTA and so on
Posted: Wed Nov 04, 2009 9:36 am
by chrislandy
Although I don't need them (as I already have a set)...
Anyone who is planning a forged build and using an aftermarket ecu (DTA/Emerald/MS etc) These injectors are a direct replacement for the standard rover injectors and use the same plugs on the rover loom and no mods to the fuel rail are needed, you'll probably have a hard time finding them at this price too...
Re: Siemens 660cc for use with DTA and so on
Posted: Wed Nov 04, 2009 2:15 pm
by Roger Red Hat
hmm..
emerald system i was looking for going to! may come in handy! spose i can always sell them back on..
dibs me for now untill friday when its payday! =)
they run as standard too? so can use with my mems?
Re: Siemens 660cc for use with DTA and so on
Posted: Wed Nov 04, 2009 4:42 pm
by TheRealStig
Would of thought it would be pointless using them with mems?
Re: Siemens 660cc for use with DTA and so on
Posted: Wed Nov 04, 2009 5:14 pm
by Cableguy
roger red hat wrote:hmm..
emerald system i was looking for going to! may come in handy! spose i can always sell them back on..
dibs me for now untill friday when its payday! =)
they run as standard too? so can use with my mems?
The car will overfuel massively if used with mems.
Re: Siemens 660cc for use with DTA and so on
Posted: Wed Nov 04, 2009 7:32 pm
by ryan_220
These are sold pending payment
Re: Siemens 660cc for use with DTA and so on
Posted: Thu Nov 05, 2009 2:37 am
by Roger Red Hat
to me i hope
and i was just wondering so i could test them out when i got here made sure they worked ok =)
Re: Siemens 660cc for use with DTA and so on
Posted: Thu Nov 05, 2009 1:37 pm
by jaguar82
You can use use it on mems for Ti but need to low down fuel preassure to 21 psi... you will have bad idling and more CO. So, better to not!
Re: Siemens 660cc for use with DTA and so on
Posted: Thu Nov 05, 2009 6:13 pm
by ryan_220
jaguar82 wrote:You can use use it on mems for Ti but need to low down fuel preassure to 21 psi... you will have bad idling and more CO. So, better to not!
No you cant they wont work with "MEMS"
Re: Siemens 660cc for use with DTA and so on
Posted: Thu Nov 05, 2009 6:14 pm
by ryan_220
roger red hat wrote:to me i hope
and i was just wondering so i could test them out when i got here made sure they worked ok =)
No because you wasnt fast enoth, why would you need to test them i dont sell damaged goods !
Re: Siemens 660cc for use with DTA and so on
Posted: Sat Nov 07, 2009 9:15 pm
by Roger Red Hat
i didnt say you did, peace of mind etc =)