Rovertech 2.0

Ill keep adding to list, so please check back on the updates
Prices do not included postage

added 02/02/2016 (all bits new)
FM T16 crank shells AEM5361 - £30


Added 13/02/2016 (see pics below)
4x 16 refurbed wheels (like new) with D02 tyres - £350 Pickup only road legal, possibly best trackday tyre, certainly the fastest ive used 4x100 and 4x114 fitting, 38 or 40et
4x 16 alloys with Kuhmo V70 hards, hardly used - £350 pickup only road legal, not as sticky as do2's but durable and much quicker than road tyres. 4x100 and 4x108 et40. Wolfrace prolites

Added 16/02/2016


2.5 inch zorst, single box, passes noise tests (front needs custom fitting) - £85
Gtech Gmeter - £40 (this is an extremely accurate and simple way measure performance. Ive compared it to 10hz gps and this wins)
Plastic side windows (rear sides and passanger) - £60
Alloy front strut brace - £70

Added 05/03/2016
Blitz metal air filter + adapter - £50
spacers 16mm (x2) - £30
spacers Rovertech ones (x2) - £20
Starter motor - £10 each

added 18/03/2016
Piston dumpvalve (on turbo) + adapter for off turbo. motobuild branded, i forget the oem - £40
Irwin rounded bolt remover kit (5 piece) NEW and unopened - £12.00 posted.


added 17/04/2016
Front left 200 suspension arm (new) £15
Front lower arm - bush removed - good condition - £15
battery tray, strap, sheathed cable (thick for less drop) etc = £22


04/05/16
Brakes - dropped to £500
Will split the wheels and tyres:
Dunlops - £280
V70's - £280
Wolfrace prolites - £100
The other wheels (like new)- £180

Wheel nuts. Generic open end + Rover ones. Lots. £25
Good cam cover (just the big main bit) £10
Engine hoist - £50 Pick up only!

21/5
Set of 4 (new) NGK v no.6's - £8
Set of 4 (new) NGK std no.8's - £8
British boost gauge (psi) -£20 (forget the make, but its a decent one thats pretty heavy compared to my other gauges)

22/5
Mems turbo ecu (2 diff ones) £15 each
AEM fuel pressue reg with gauge - £50
5x clutch calbes, some new, missing spacer bits etc £28
Im open to offers on multiple items.

NOTE: any item under £10 must be bought with something else!

Sold items moved this post

**Ti box with tybe B = £120 NO POST Box needs a new bearing but sound apart from that SOLD
**T16 engine (as per other post) = £120 NO POST SOLD
*spacers 16mm (x2) - £30 (not the rovertech ones, these are fancy blue ones that cost a fortune) SOLD
DTA s60 with cable, loom and a laptop - £450 **SOLD
Full Safety devices rollcage for ZR/mk3 - £400 Sold
GT28rs Turbo, ceramic cold bit, about 5k miles - £300 **sold
3071r Turbo £400 **SOLD
Forged engine - £450 (inc ancileries, no turbo, no inlet, no loom) Farndon rods and wossner pistons. Adjustable pullies, cams etc. Smokes on overrun from high rpm but runs fine pickup only. **Sold
Box, ti ratios, steel caged, quaife - £250 **SOLD
Dizzy inlet manifold with 660cc injectors - £100 **SOLD
Set of worn JE pistons on oe rods = £150 posted **Sold
Used (not much) organic Helix clutch kit - £70 **SOLD
ARP big end bolts for OE T16 rods (206-6002) - £55
Gizzmo boost controller - £70 Sold
Good throttle body with idle control setup for DTA - £50 (inc brakcet, TB, ICV, pipework, TB ICV plate) SOLD
Spal fans (push) - £20 each. ** sold
B&G adjustable top mounts (front) - £100. **sold
6 point harness, excellent condition, in date till 2018 Black - £70 (changed to my passanger belt as its next to unused.) **sold
Front turbo ARB with poly bushes (inc drop links) - £30. **sold
Inovate wideband (gauge, wiring, sensor) - £80 **Sold
Big (very) intercooler inc. pipework for dual pass (passangers side) - £85 **sold
Cookie downpipe - £120 **sold
6paddle plate (50% wear) with cover and adapted flywheel - £220 Takes well over 300bhp and light pedal **sold
Ring 12v Charger (8amp) = £8 ** Sold
magnecor red leads (WS) = £20 * Sold
3bar marelli map sensor - £25 **sold
Radtec rad + pipe work + fans + water temp gauge and sensor - £125 This is a must have if your doing track work **sold
locking aerocatch thingys (genuine) £20 ** Sold
FSE Reg with rail adaptor, and pressor sensor = £30 **
Swirl pot and 2x Bosch pumps - £125 **
MGR big ends - £45 **sold
Uprated clutch kit aprx 250-300bhp (unused, but some stoarage marks) - £160 **sold
Full engine mount kit (uprated - inc 2x Roversport mounts) - £100 (brought these down as they should of sold!) WILL split. **SOLD
Front mount oil cooler kit with temperature and pressure sensors and gauges and mounting plates - £85 Includes new ti oil cooler (needs drilling) AND connectors from 220. **sold
Big brake kit (310mm)– discs, pads, calipers hardly used - £500 very light and will take anything you throw at it. **sold
1.5 degree camber plate (rear) - £20 ** sold
2.5 degree camber plate (rear) - £20
OE coil = £8 (recommended to buy with something else due to postage) **sold








Wheels and tyres
The wear is pretty even on these tyres as i set it up to have even temps across the surface. One dunlop has a ring around the inside where its touched a damper. Ive used it as its not very deep and i feel its safe. You will need spacers to use the dunlops as they are 225.

Kuhmo






Dunlop

If I don't hear back from Jimmy about the crank he is selling, I'll have yours if that's ok.

Sorry Jason, thats gone now. I should of marked it sold. Soz

bump for tyres and turbo

Talk to me about the turbo matey

bump for more bits

So much good stuff, so little money

Drew

Christ on a bike, going to text message.

You WILL regret this

Turbo still available mate?

The 3071? Yes thats still here

You WILL regret this

Yes, i will Dan.

jase wrote:The 3071? Yes thats still here

You WILL regret this

Yes, i will Dan.

Sorry bud, didn't realise till after I posted that there was 2 turbos there

Was asking about the gt28rs, that gone mate?

I will have the dta, send me payment details

EDIT: Interested in the cage too mate

For those who have PM’d, I apologise for any slow replys, ambiguous replies or saying items are sold that are not flagged with any update to the OP.

A lot of people on here know me and know I won’t do anything dis-honest or sell anything crap (at least not intentionally!)so please bear with me.
Ill start stripping the car at the weekend, ill keep the thread updated on how this goes so people know when the parts they want are available to dispatch.

Those that said they want parts or pictures Ill update with more info on Sunday.

Id also like to thank everyone ive been speaking to and dealing with. Everyone has been understanding (where ive been awkward) and those who are being awkward, havnt been.. if that makes sense!

What is the big brake set up

Its the new(solid bridge bolt, billet, steel pistons, square seals etc) wilwood superlites, Hispec ally bells and brackets, PF race pads and hispec 310*28 discs.
pads and discs have very little wear.


Ill get some pics

Jason36 wrote:What is the big brake set up

Read his thread?

ghall2004 wrote:

Jason36 wrote:What is the big brake set up

Read his thread?

Don't need to Jase replied.

soz, no brake pics yet. Ill see if i can get them off and cleaned up at the weekend.
They look a bit dirty at mo which makes them look like they are worth £6.50!


and bump for some bits.

Can you give me a posted price on boost controller plus a pair of good driveshafts please (assuming they are R8 turbo ones with ABS), and PM me how to pay.

Pics of the brakes
Ive not used A2 bolts or anything daft. Some fasteners are imperial.
This is a really good kit, the car needed to be able to run for as long and fast as i wanted and this setup had that covered.

Discs, minimal wear (only done 2 trackdays iirc)
Bells are originals so marked but no issues. A spare disc will be provided as a template for replacements (I get hi spec to cut mine)



Brackets are originals and have some corrosion, nothing serious.



PF Pads, again only a couple of track days. I cant remember which compound they are, but they really are superb and last forever.



Calipers, these are the latest superlites with integral cross overs, ambidextrous mounting, steel pistons, square seals and solid bridge bolt. They are very light and very compact.

Fancy splitting the Dunlops from the rims Jase?

Also any pic on the rubbing?

Dave

Im going to try and avoid that Dave, but i may consider if they dont go together. I think ill endup wasting half a day and 50quid for the privalidge of loosing 100quid on each set!


And thought id share something from the weekend.
Greg see's my son and exclaims "Ive seen you on the internet!... oh, erm, not like that...."

some more items added
And again, thanks for those who have purchased items off me, ive had no problems with anyone.

Its also nice to see some parts being used, the dta and forged engine is running, the 3071 is set for an interesting project, the old box with a quaife has been in a car and promptly had to be removed!

Radtec rad + pipe work + fans + water temp gauge and sensor - £125


would like to buy the above parts and interested in these parts below
Are the bearings Std sizes

FM T16 crank shells AEM5361 - £30
MGR big ends - £45


any pics of the Rad?

couple more items added and others removed (sold)

thanks

A couple of price alterations on the higher valued items.

Wheels now offerred split from tyres (or vice versa!) Price is up tho for being split.

What size are the Dunlops Jase?

Dave

225x45x16 Dave.

On hindsight i should of sold these seperate to the wheels from the start.

PM'd ref WS coil

another bumpo
Added a couple more items. There was a few more bits but that was 10 minutes ago and ive now forgotten. God im special.

spacers Rovertech ones (x2) - £20 Yes Please

any working gearboxs mate