Rovertech 2.0

Hi All,


After 14 years of being on the Rover scene I'm selling up what I have left,

Coupe front bumper with fogs, no cracks but does need a paint job,
Various down pipes, intermediates and back boses
Fuse boards,
Expansion tanks,
Rear trailing arms,
Front lower arms,
Flywheels (4gap)
Radiator and intercooler brackets,
Intake manifold including spare top half's that read 'Turbo',
Hub assemblies,
x4 cylinder heads (cams removed but are there with some surface rust)
4 or 5 bottom ends (some bare block couple built with sumps)
Oil pumps (one brand new)
1 used good crank,
Front shock struts,
various boxes of bolts and mounting plates,
Front coupe wing,
Parts of wiring harness,
Shirt driveshafts
Rover pin's if you wanted to repair or make a loom,
Fan bracket including two fans
Various coolant and boost hoses
Injectors
Spare valves and collets
Oil cooler lines
Clutch cables
Throttle cables,
Stock A.E rods and pistons
Bag full of various sensors
Thermostat housing
Crank and cam pulleys
Gearbox back plates
And I'm sure there's more that I've forgotten. You'll need a van to collect from Birmingham B31.

£200 no offers

If interested 07823 44 35 21

Bargin wish I had more space lol

Provisionally sold pending collection next week.

As mentioned, this is a bargain, so I have sapped it up Only really for the engine related stuff so if there's anything someone wants from the list please let me know. Certainly any R8 based items I will be selling on as I have no use for them. Ruthlessly making a few quid isnt the intention here, any money I take will be put towards a good cause
I'll be collecting the booty next weekend and no doubt it'll take a while to sort out what's what and suss out what to keep and what to sell. I know a few years ago people would have been asking for bits x, y & z off the list so hopefully there's enough interest still in these modern times
So please dib stuff with a reasonable offer as the money raised should help us all - a bit cryptic I know but check the POL 2018 thread in the living room...

That’s brilliant Mitus

Get that list up



I may need some bits

Awesome I would of wanted the engine related items also but I have 3 engines any way lol so would of just been being greedy hahahaha

Turbo top half. Dibs

Lol

Mitus I am after a K-Series Stainless Exhaust for my Cabby so if there is anything like
that in your new stash let us know pal.

Hi Mitus, if you have any coolant hoses for 220 turbo, especially ones that connect to the heater matrix, i'd be interested. thanks.

I now have the job lot in my possession! Well, actually it's still in the back of my dad's van

ROVER-25X wrote:Mitus I am after a K-Series Stainless Exhaust for my Cabby so if there is anything like
that in your new stash let us know pal.

No k-series goodies I'm afraid.

RikK wrote:Hi Mitus, if you have any coolant hoses for 220 turbo, especially ones that connect to the heater matrix, i'd be interested. thanks.

No coolant pipes either.
Only pipes I remember seeing were boost pipes and IIRC they are uncut if they're of use to anyone. Also remember seeing at least one 2 gap flywheel.

1 Turbo top half put aside for vinny. There's 1 more and 1 injection embossed version too. I'll update the list properly once I've had chance to sort through it all.

No worries pal, thanks for checking though.

Apologies for the delay getting pics up, there was a lot to sort through! These are the parts which I will definitely not need so are the first to go. Once I've cleared some space I can go through the rest a bit better.

T-Series turbo exhaust manifolds x2. One has a bolt hole opened up (top of pic) presumably for a bigger bolt/stripped thread.


220 Steering racks. One normal power assited, the other a manual so possibly good for track toy?


220 PAS cooling pipe


I assume these are bumper brackets? Having never owned an R8 I don't recognise them


Oil cooler & pipes, a pair of pipes and 1 long pipe only with a braided flexi section


220 Front subframe


Pair of coupe front wings. Dusty but look good condition, think they are Charcoal



Exhaust link pipe, looks to be stainless with mild steel flanges. Cat is gutted so basically a de-cat




R8 Engine bay fusebox


R8 Front bumper with fogs. Paint is cracked in places but bumper itself looks OK.




R8 Tail lights


NASP top half of inlet (no tapping for PCV breather)


R8 O/S headlight


220 Engine mount parts, quantities as shown






Boost pipes. I thought they were un-cut at first but one of the long ones looks longer than the other?


R8 Lower arms fitted with poly bushes


R8 Front hubs


Targa roof panel bag, dusty but good condition


220 fan frame & another with fans


I believe these are referred to as "hockey sticks"? Thought it was a pair but looks like they're both O/S


Chrome grill, all mounting studs are intact


200/25/ZR Header tanks


Standard turbo elbow. Lambda included but don't know if it works!


Dash strips with clock. One is black plastic, the other is wood which has been painted black that is lifting in places.


R8 N/S Front indicator


R8 O/S Hub & lower arm


R8 Front struts & hubs


Some of this may be worthless but I'd rather offer it up in case it is of use to someone. I have no clue what the stuff is worth so please make me offers. Would prefer the bigger stuff to be collected either from me in Oxfordshire OX11 or it can be relocated to Leicestershire LE10 at my dads if that helps.

Have you got a N/S front hub with ABS?

I want a turbo top inlet
That braided p/steering pipe too (I bought one here last year from ttrw but never received it (or a refund)

The fog lights I would sell separate worth decent money

Badboyrich wrote:Have you got a N/S front hub with ABS?

All the hubs have the mounts for an ABS sensor, the pair with the struts still fitted have the sensors in.

vinny19791 wrote:I want a turbo top inlet
That braided p/steering pipe too (I bought one here last year from ttrw but never received it (or a refund)

The fog lights I would sell separate worth decent money

I put aside a turbo inlet for you. The braided pipe is for the OE oil cooler, not PAS. Point taken with the fogs, if someone wants them I'll take them out of the bumper.

There are also 5 flywheels, 4x 2 gap & 1x 4 gap IIRC.

Bugger

ok mate

Have you got a pair of abs sensors?

turbo200 wrote:Have you got a pair of abs sensors?

Lol

I imagine no as they snap just by looking at them

plenty of lube required if I remember correctly!

I already have a good O/S hub, but was going to fit ZR diesel shocks / springs to it. I imagine that your full front legs are genuine 220 coupe so would prefer those, and a 2 gap flywheel. I would prefer to pick them up from Hinckley area. Do you want to PM me a price if they are still available.

turbo200 wrote:Have you got a pair of abs sensors?

I'll have a look when I get chance, there were a few boxes of bits & bobs!

Front struts/hubs sold pending payment.