Alloy Inlet Bracket Seals ( no more RTV sealant !)

[Cableguy]

Right , ive noticed people tend to use RTV sealant when they use the Stebtech brackets or alloy inlet brackets which always makes me a little nervous and its always a game to clean off when you remove and refit.

So i have these....







If anyone is interested, i can do them at £5 + a stamp for the two if i get 10 people ?

Guaranteed total seal.

[Allanwarnock]

I would buy them m8, but need the mount too.... but cant seem to find them anywhere...

[Cableguy]

Buy them ready for when you find one lol.

In all seriousness im working on getting some of the brackets made too if ste is ok with it , but it will be after christmas now.

[matt077]

i be keeping my eye on this one

[bgunn]

If you're making them up new, it might be an idea to machine an O ring groove into the hole around the t/b?

[Cableguy]

If you're making them up new, it might be an idea to machine an O ring groove into the hole around the t/b?

Yeah thats something ill look in to when i get some alloy to practice with

[Cableguy]

i be keeping my eye on this one

Just put yer name down and when we get 10 ill start the ball rolling

[syzsounds]

I'm in for a T series one for the tourer please.
I could send you the bracket as well if you need to copy one.

[Cableguy]

I'm in for a T series one for the tourer please.
I could send you the bracket as well if you need to copy one.

I have one to copy so ill keep you posted.

Your interest above is for the bracket or the seals ?

[syzsounds]

I'm in for a T series one for the tourer please.
I could send you the bracket as well if you need to copy one.

I have one to copy so ill keep you posted.

Your interest above is for the bracket or the seals ?

Seals please as i already have the bracket.

[Cableguy]

Sound , i think if matts having a set thats 2 so far , wont take long at this rate

[m220syg]

im in need of a alloy stebtek mount

[brad]

dude put me down for some please

[rovermadman4825]

I would buy them m8, but need the mount too.... but cant seem to find them anywhere...

+1

if you can get the brackets al have a set

[MarkCoupe]

Nice items Dan.

[Imran]

I need one for an M-series dan. Got a steb alloy bracket for my coupe but need the gasket/seal if you have one

cheers mate.

[Cableguy]

Are the gaskets not the same on this setup ? naturally the throttle one will be the same , is the manifold end any different ?

If so yes i can do that anyway as i have a manifold i can use to draw the files up

[james26386]

Put me down for some seals - was never happy using Hylomar TBH so this would be a bit more tidy.

[pucc]

put me down for both please and an alloy bracket..

[Mat_clarke]

ill have a set of seals of you, ive got new alloy inlet to go on mine, as u say it save using sealent,

[Anthonyti]

put me down for a pair dude let me know when you're ready to send

[Cableguy]

Right then lets start a list , can people check please and add there name from now..

1.Matt077
2.Alanwarnock
3.Syzsounds
4.Bradharris
5.Imran T - M series
6.James26386
7.Mar_Clarke
8.Anthonyti

[rovermadman4825]

Right then lets start a list , can people check please and add there name from now..

1.Matt077
2.Alanwarnock
3.Syzsounds
4.Bradharris
5.Imran T - M series
6.James26386
7.Mar_Clarke
8.Anthonyti
9.rovermadman825

[pucc]

Right then lets start a list , can people check please and add there name from now..

1.Matt077
2.Alanwarnock
3.Syzsounds
4.Bradharris
5.Imran T - M series
6.James26386
7.Mar_Clarke
8.Anthonyti

er hello!!!!

[Cableguy]

1.Matt077
2.Alanwarnock
3.Syzsounds
4.Bradharris
5.Imran T - M series
6.James26386
7.Mar_Clarke
8.Anthonyti
9.rovermadman825
10. pucc

Looks like were on , if people could pay by paypal gift to danielblewitt@btconnect.com the sum of £5.50 and put as the reference your forum username and attach your address as a note i can get these out asap.

Cheers

[rovermadman4825]

When are you going to see about the alloy brackets just theirs a few of us who only want the gaskets if we can get the ally block

Regards Ross

[Cableguy]

Will be after christmas now mate, i break up from work in 2 days so not really any scope for me to rape the machinery this side of christmas.

Ill do my best after crimbo , but this is primarily for the gaskets at the moment

[rovermadman4825]

Fair enough just making sure we wernt going to get these seals and have no reason to use them lol

[james26386]

Money sent!

[rovermadman4825]

Money sent mate

[brad]

dan ill give u cash the wk end

[Mat_clarke]

Payment sent

[reggy5]

how much will the bracket be dan? put me down for one of them

[Anthonyti]

money sent!

[Cableguy]

4.Bradharris - PAID
6.James26386 - PAID
7.Mar_Clarke - PAID
8.Anthonyti - PAID
10. pucc - PAID
11.C2K - PAID

9.rovermadman825
5.Imran T - M series
1.Matt077
2.Alanwarnock
3.Syzsounds

Cheers

Right then , now ive paid for the privelage of getting this back up and running , can the people outstanding do the same and pay me so i can get these out for the folks that have paid before crimbo please, if all else fails ill post them out when i return to the uk around the 16th of Jan.