Thinking of selling up, alot of T16 goodies

[rover__dan]

As per title says, I'am thinking of selling up and just wondering of prices of all my parts.

List includes:

Freshly rebuilt forged T16 bottom end, with 85mm Accralite forged Pistons with new piston rings & oil scrapper rings, Standered T16 rods, brand new Crank & shells, oil pump fitted by MJA Eneineering bromsgrove.

Freshly rebuilt T16 head- Big polish & port, valves re-seated and new valve stem seals & skimmed also by MJA Eneineering bromsgrove.

Arp head studs.

Alloy rad.

Standered rad with fresh re-core.

Stainless manifold- janspeed

Full non A/C stainless coolent pipes & rad brackets with dipstick.

Part non A/C stainless pipes - top & bottom rails, rad brackets, small pipe return to coolent bottle but not main part.

Lightened & balanced 2 gap flywheel & 550 ecu done by MJA bromsgrove.

5 piece blue samco kit - top rad, bottom rail, thermostat to rail, turbo to rail, coolent bottle to bottom rail.

2.5inch cookie downpipe but needs new flexi.

Full 2.5inch stainless Magnex exhaust system - oval tip.

De-cat pipe.

M- series inlet with stebtech bracket.

Stainless T16 washer wiper bottle.

Brand new Borg & beck stage 2 t16 clutch with receipt from GBE.

New jap rear plinth in primer.

220 hatch genuine top roof spoiler.

620ti gearbox - type B with steel cage bearing and a diesel 5th gear sprocket fitted.

220 type B gearbox.

Set of 220 drive shafts fine when removed.

Standered T16 bottom end, was rebuilt with new piston rings & new crank & shells, was only ran in for about 1000miles then removed as sold car.

New 220 timing belt kit.

New 220 water pump.

Think that's all for now.

[rover__dan]

Anyone got any ideas of prices? Before this lot go's up for sale.

[Deckz]

Coupe?

[fridge85]

Any idea what you want for the decat pipe and timing belt kit? If there still available?

Cheers,
Wayne

[rover__dan]

Pm'd

[rzrdan]

How much for the engine? With the forged pistons that is

[rover__dan]

£450 collected

[HA54SYM]

I thought this was a WIW thread, but as we are asking.

Any spec or paperwork for the head? Standard Cams?

Also pics of Manifold.

Dave

[rover__dan]

Pm'd

[tomcat]

pmd
cheers
Scott

[vinny19791]

Standard and ally rad posted each?
Cookie downpipe