Everything must go... Lots of good bits...

[Allanwarnock]

Selling all my parts.

-----------------------------
Custom made Forge front mount Intercooler designed to fit into the zr bumper. This makes a huge difference to the air flow. Spools up much quicker, and boosts A LOT better. Will come with Samco hoses and hard pipes. Been fitted and drove on for 50 miles. £500

Pair of very good condition drive shafts for 220 turbo £100

Pair of 220 turbo standard wasted spark cams with cam end covers(rare) £60

2 x gear linkage with UJ upgrade for zr or 220 £50 each

Brand new 220/ZR front subframe powdercoated purple £100

Used 220/zr front subframe £25

ZR rear subframe fully built with steering rack, roll bar. Also have the 220 metal mount for you to weld on to it. (I never got round to welding it or powdercoating it) £100

2 x T16 turbo exhaust manifolds £20 each

3 x T16 inlet manifold. All TURBO manifolds £40 each

2 x T16 turbo elbow. £15 each

220 turbo Bosch non ac alternator. Small chip on the housing but won't effect its use. £25

220 turbo oil pump with cooler take off, 46k, off Keith's 220T. Vgc £75

220 turbo front engine mount, very good condition £70

Set of zr straits, bad condition but all strait and ideal for powdercoating. £60

2 x zr straits with Michelin S4C full slick tyres. (I have 4 full slicks, but only 2 good wheels) tyres have 2-3mm left on them, 5mm new! £200

Set of 19" Dare v4 alloys with yoko Parada 215/35/19 tyres. 2 with 3-4 mm, 2 with 2-3mm. £375

Genuine Rover 220 turbo coolant sensor, brand new in its packaging. Bought from rimmers £20
Genuine Rover 220 turbo oil pressure sensor, brand new. £20


There's plenty more.... I will update when I find things...

[Drew]

what are the actual ratio's in the box?

Drew

[turbo200]

So much want everything! But so little moneys!

Some great bits of kit to be had.

[Allanwarnock]

what are the actual ratio's in the box?

Drew

This is a very good question Drew, I don't know the exact figures.
I didn't build the box myself, a company called "Automek" built it for me. Those guys know their stuff.

[fridge85]

Don't suppose you've got a cambelt side engine mount there have you mate?(rubber part)

Cheers,
Wayne

[Allanwarnock]

Don't suppose you've got a cambelt side engine mount there have you mate?(rubber part)

Cheers,
Wayne

That's 1 part that I have never needed, so unfortunately I don't have a spare.

[fridge85]

Don't suppose you've got a cambelt side engine mount there have you mate?(rubber part)

Cheers,
Wayne

That's 1 part that I have never needed, so unfortunately I don't have a spare.

Ahh bugger worth a try

Cheers mate,
Wayne

[HA54SYM]

Condition on slicks?

Dave

[Allanwarnock]

Condition on slicks?

Dave

2-3 mm till the wear markers. Still a good hard session left in them. They have picked up some bobbles from the cool down lap off the racing line, but these will fall off in your first hot lap.
These tyres are hard to get now. (The S4C)

[Stevo135+]

Hi Alan.

Just a question about the OMEX ECU. Does it come with a T16 engine loom ready to plug and play?
Also would an Escort cosworth map be useable as a base map to drive to the mappers with and have it set up?

I'm not in a rush to buy as I have several other parts priorities, but I'd like to put an OMEX back on Dan's Storm coupe at some point, probably at same time as a BB turbo.

[Allanwarnock]

Engine, omex, helix sold...
Still plenty left... Make me an offer.

[Allanwarnock]

[Allanwarnock]

Updated list with sold parts gone.

Selling all my parts.

-----------------------------
Custom made Forge front mount Intercooler designed to fit into the zr bumper. This makes a huge difference to the air flow. Spools up much quicker, and boosts A LOT better. Will come with Samco hoses and hard pipes. Been fitted and drove on for 50 miles. £500

Pair of very good condition drive shafts for 220 turbo £100

Pair of 220 turbo standard wasted spark cams with cam end covers(rare) £60

2 x gear linkage with UJ upgrade for zr or 220 £50 each

Brand new 220/ZR front subframe powdercoated purple £100

Used 220/zr front subframe £25

ZR rear subframe fully built with steering rack, roll bar. Also have the 220 metal mount for you to weld on to it. (I never got round to welding it or powdercoating it) £100

2 x T16 turbo exhaust manifolds £20 each

3 x T16 inlet manifold. All TURBO manifolds £40 each

2 x T16 turbo elbow. £15 each

220 turbo Bosch non ac alternator. Small chip on the housing but won't effect its use. £25

220 turbo oil pump with cooler take off, 46k, off Keith's 220T. Vgc £75

220 turbo front engine mount, very good condition £70

Set of zr straits, bad condition but all strait and ideal for powdercoating. £60

2 x zr straits with Michelin S4C full slick tyres. (I have 4 full slicks, but only 2 good wheels) tyres have 2-3mm left on them, 5mm new! £200

Set of 19" Dare v4 alloys with yoko Parada 215/35/19 tyres. 2 with 3-4 mm, 2 with 2-3mm. £375

Genuine Rover 220 turbo coolant sensor, brand new in its packaging. Bought from rimmers £20
Genuine Rover 220 turbo oil pressure sensor, brand new. £20


There's plenty more.... I will update when I find things...

[Allanwarnock]

Bump