tickford 820

To post in here you must be a member of the "Classified Approved" group. To become a member of this group you MUST have at least 25 posts on Rovertech. For full details, please click here.

Moderators: Forum Moderators, User Administrators

Forum rules
Can't post in this section? Please read our rules
Post Reply
craig willmer
Forum Regular
Posts: 109
Joined: Mon Feb 11, 2008 11:32 pm
Location: horsham west sussex

tickford 820

Post by craig willmer »

m16 power stering pipe to fit a 820 tickford has anyone got 1 kicking around
the one that joines at the back of the engine and goes to the pump
Image
http://s279.photobucket.com/albums/kk130/mad_fukaz/
13.901 @ 105.49 mph on open diff and 12 psi
standard engine
pulsar fmic
pulsar t28
The want for MORE never goes away
Top
syzsounds
RT GOD
Posts: 4251
Joined: Sat May 31, 2003 12:28 am
feedback: 233510
Location: Nottingham

Re: tickford 820

Post by syzsounds »

The metal ones that go over the rear subframe ?
Yep .. got em .. Pain in the arse to get off though.
No longer a Rover owner :-(
Now driving a Honda 2.4 vtec estate and a Honda VFR 750.
Staying around for the LOLZ.
Top
craig willmer
Forum Regular
Posts: 109
Joined: Mon Feb 11, 2008 11:32 pm
Location: horsham west sussex

Re: tickford 820

Post by craig willmer »

has it got the flexi rubber pipe bit on it
i have not seen it yet iv got to get one for a friend but i will probably end up fitting it :lol:
Image
http://s279.photobucket.com/albums/kk130/mad_fukaz/
13.901 @ 105.49 mph on open diff and 12 psi
standard engine
pulsar fmic
pulsar t28
The want for MORE never goes away
Top
syzsounds
RT GOD
Posts: 4251
Joined: Sat May 31, 2003 12:28 am
feedback: 233510
Location: Nottingham

Re: tickford 820

Post by syzsounds »

Yep seeing that both subframes with engine and box are sat on the deck !
No longer a Rover owner :-(
Now driving a Honda 2.4 vtec estate and a Honda VFR 750.
Staying around for the LOLZ.
Top
craig willmer
Forum Regular
Posts: 109
Joined: Mon Feb 11, 2008 11:32 pm
Location: horsham west sussex

Re: tickford 820

Post by craig willmer »

haw much delivered mate
Image
http://s279.photobucket.com/albums/kk130/mad_fukaz/
13.901 @ 105.49 mph on open diff and 12 psi
standard engine
pulsar fmic
pulsar t28
The want for MORE never goes away
Top
syzsounds
RT GOD
Posts: 4251
Joined: Sat May 31, 2003 12:28 am
feedback: 233510
Location: Nottingham

Re: tickford 820

Post by syzsounds »

No idea , I will have to check the condition of it first before i can say anything .
I'll have a look tomorrow seeing as Dan is on my back for stuff to !
No longer a Rover owner :-(
Now driving a Honda 2.4 vtec estate and a Honda VFR 750.
Staying around for the LOLZ.
Top
craig willmer
Forum Regular
Posts: 109
Joined: Mon Feb 11, 2008 11:32 pm
Location: horsham west sussex

Re: tickford 820

Post by craig willmer »

ok let me know when ur ready please mate :thumbup: thanx
Image
http://s279.photobucket.com/albums/kk130/mad_fukaz/
13.901 @ 105.49 mph on open diff and 12 psi
standard engine
pulsar fmic
pulsar t28
The want for MORE never goes away
Top
Scott
RT GOD
Posts: 13516
Joined: Sun Jul 06, 2003 9:36 pm
feedback: 210998
Location: No longer in a rover in oxfordshire :(
Contact:
Contact Scott

Re: tickford 820

Post by Scott »

mach1rob on the rovergroup.org forum might have a brand new one that i sold him along with the car. I bought it brand new from an autojumble, i got both of em i think in the box of stuff i handed to him with the car...
Top
syzsounds
RT GOD
Posts: 4251
Joined: Sat May 31, 2003 12:28 am
feedback: 233510
Location: Nottingham

Re: tickford 820

Post by syzsounds »

Right , Just had a look and i then remembered that they aren't standard pipes anymore.
I had the metal ones replaced with high pressure hydraulic hosing.
Theres standards on the car i have now but they are an absolute tw4t to remove.

So sorry fella .
No longer a Rover owner :-(
Now driving a Honda 2.4 vtec estate and a Honda VFR 750.
Staying around for the LOLZ.
Top
craig willmer
Forum Regular
Posts: 109
Joined: Mon Feb 11, 2008 11:32 pm
Location: horsham west sussex

Re: tickford 820

Post by craig willmer »

anybody else please as i still need this.
cash waiting.
Image
http://s279.photobucket.com/albums/kk130/mad_fukaz/
13.901 @ 105.49 mph on open diff and 12 psi
standard engine
pulsar fmic
pulsar t28
The want for MORE never goes away
Top
Post Reply

Return to “Car parts Wanted”